Lithofin KF Cement Residue Remover - 1 Litre

A special product from the LITHOFIN-Range for ceramics, quarry tiles and porcelain (KF). Lithofin KF Cement Residue Remover is a highly active cleaning concentrate based on a special composition of acids and supporting agents. The product is nearly odourless and does not develop any vapours.

Properties

Lithofin KF Cement Residue Remover dissolves anorganic deposits such as cement and mortar residues, efflorescence, rust and calcium deposits. The dirt can then be completely removed from the surface.

Field of Use

Due to its mild odour, Lithofin KF Cement Residue Remover is particularly suitable for indoor use. For cleaning all ceramic surfaces, which need to be cleaned after laying and grouting. The original appearance of the surface is restored.

Surfaces: suitable for all acid resistant ceramic wall and floor tiles, quarry tiles, porcelain, clay and brick as well as terracotta surfaces.

Directions for Use

Dilute Lithofin KF Cement Residue Remover approx. 1:5 to 1:15 with water depending on the stubbornness of the deposits. Apply the solution to the wet surface and spread with a brush or scrubber. After several minutes, remove the solution from the surface with a wiping cloth or a wet and dry vac. Rinse well with clear water. In case of stubborn deposits, repeat this procedure with a lower degree of dilution or undiluted.

Please Note: always test the product in an inconspicuous area prior to use. Acid sensitive surface such as enamel, zinc, marble, limestone, certain decorative tiles, wood, etc. must be protected against splashes.

Coverage: approx. 12 to 30m² depending on the type and degree of dirt.

Advice: in extremely stubborn cases, we recommend Lithofin CEMENT-AWAY - for outdoor use only..

Storage

Keep closed and cool. Shelf life of up to five years.